Custom Round Standoffs – Custom Round & Hex Standoffs & Custom Round & Hex Spacers https://www.engineeredstandoffs.com Custom standoffs and spacers in variety of stainless steel, carbon steel, aluminum, plastic, and the more rare exotic materials. Fri, 10 Nov 2023 21:57:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.2 194122514 Custom Stainless Steel Metric Male-Female Standoffs https://www.engineeredstandoffs.com/portfolio/custom-stainless-steel-metric-male-female-standoff-factories/ Fri, 10 Nov 2023 21:57:46 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5206 The post Custom Stainless Steel Metric Male-Female Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

These custom metric male/female standoffs were manufactured using 303 stainless steel material with commercial passivation. M5 thread was tapped to a depth of 8MM and the male extension was machined without thread to a diameter of 3.8MM and length of 3MM. The distance across the flats used for wrenching during the application was set to 7MM.

The post Custom Stainless Steel Metric Male-Female Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5206 Custom 360 Brass Alloy Precision Machined Spacers https://www.engineeredstandoffs.com/portfolio/custom-360-brass-alloy-precision-machined-spacer-manufacturers/ Tue, 26 Sep 2023 17:12:15 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5191 The post Custom 360 Brass Alloy Precision Machined Spacers appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

These custom precision machined spacers were manufactured for our electronics customer using 360 Brass Alloy material per QQ-B-626. The small diameter extension pin had the tightest tolerance measuring .038″ +.000/-.002″ while the main body diameter was set to .125″ +/- .002″. Overall length of the spacer is set to .234″. Full certs were provided with the parts.

The post Custom 360 Brass Alloy Precision Machined Spacers appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5191 Large Custom Aluminum Standoffs https://www.engineeredstandoffs.com/portfolio/large-custom-aluminum-standoff-manufacturers/ Fri, 03 Dec 2021 16:47:16 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5171 The post Large Custom Aluminum Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

We supplied our automotive customer slightly over 1,000 pieces of these large custom aluminum standoffs using 6061 aluminum material with plain finish. The diameter was .75″ and we ran two separate lengths: 4.75″ and 5.125″. The female/female thread on both lengths was 1/4-20 with minimum thread depth of .50″. No PPAPs were required for these specific parts and only material certs and a certificate of conformance was available.

The post Large Custom Aluminum Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5171 Custom Partial Hex Standoffs – Fully Internally Threaded In 18-8 Stainless Steel https://www.engineeredstandoffs.com/portfolio/custom-partial-hex-standoffs-fully-internally-threaded-in-18-8-stainless-steel/ Thu, 25 Jul 2019 20:43:40 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5116 The post Custom Partial Hex Standoffs – Fully Internally Threaded In 18-8 Stainless Steel appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

These custom partial hex standoffs measure M6 – 1.0M X 22MM and are domestically made using 18-8 stainless steel material. The hex height is set at 6MM and hex across the flats at 10mm. The round standoff portion is set to 8mm for the outside diameter. All dimensions had +/-.01MM tolerance. Lead time to get these parts produced was approximately 6-8 weeks from production start. Material certs were available upon request with the parts.

The post Custom Partial Hex Standoffs – Fully Internally Threaded In 18-8 Stainless Steel appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5116 Custom Large Stainless Steel Standoffs – 1/2″ Round OD X 3 Inches In Length https://www.engineeredstandoffs.com/portfolio/custom-large-stainless-steel-standoffs-1-2-round-od-x-3-inches-in-length/ Thu, 25 Jul 2019 20:21:24 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5114 The post Custom Large Stainless Steel Standoffs – 1/2″ Round OD X 3 Inches In Length appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

Our architectural element construction customer ordered approximately 4,000 pcs of these custom large stainless steel spacers. 5/16-18 thread was incorporated internally, 1-1/4 inches of thread min on each side. The gap between the two sides of thread was drilled all the way through for improved production time, allowing the entire part to be drilled through and then each side tapped on both sides. The outside diameter was set at 1/2″ and the overall length at 3″. Tolerances on all dimensions were +/- .015″. 303 stainless steel material was used for production and material certs are available upon request.

The post Custom Large Stainless Steel Standoffs – 1/2″ Round OD X 3 Inches In Length appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5114 Custom Electronics Standoffs In Plain Brass Material With 2-56 Thread https://www.engineeredstandoffs.com/portfolio/custom-electronics-standoffs-in-plain-brass-material-with-2-56-thread/ Thu, 25 Jul 2019 18:17:32 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5112 The post Custom Electronics Standoffs In Plain Brass Material With 2-56 Thread appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

2-56 thread was incorporated in these custom electronics standoffs to run all the way through the part measuring 0.32″ in overall length. The thicker portion of the custom part measures .13 inches in length, with the diameter at .22 inches. Its thinner profile has a diameter of .14 inches.  DFARS plain Brass material was used per our customer requirements.

The post Custom Electronics Standoffs In Plain Brass Material With 2-56 Thread appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5112 Custom Aluminum Standoffs – 6-32 X 4″ Female/Female Round Standoffs https://www.engineeredstandoffs.com/portfolio/custom-aluminum-standoffs-6-32-x-4-female-female-round-standoffs/ Thu, 25 Jul 2019 18:09:24 +0000 https://www.engineeredstandoffs.com/?post_type=liquid-portfolio&p=5108 The post Custom Aluminum Standoffs – 6-32 X 4″ Female/Female Round Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]>

These are 6-32 female/female custom aluminum standoffs measuring 4 inches in overall length and tapped 3/8″ deep on each end. Outside diameter is 1/4″. Production was done overseas for optimal cost and lead time for the first release is typically at 120-140 days. This part we supply on a revolving annual blanket release arrangement that allows our customer to spread out the cost over the year as they use the parts.

The post Custom Aluminum Standoffs – 6-32 X 4″ Female/Female Round Standoffs appeared first on Custom Round & Hex Standoffs & Custom Round & Hex Spacers.

]]> 5108